StarTech.com PEXMSATA343 Manual de instrucciones descargar pdf (Pagina 13)

Instruction Manual

3. From the “Create new VD” screen that appears, click the “Select RAID Level” drop-

down to choose the appropriate RAID type

4. This will enable you to place a checkbox beside the disks that you would like to use

as part of the RAID set. Once you have selected, click “Next” to conrm

your selection.

5. You will now be presented with conguration options for your RAID set. Choose the

appropriate options and select “Submit” to conrm your changes. Your virtual disk

will then be visible in the left pane – the same properties can be accessed later by

selecting your virtual disk from the left pane.

HyperDuo Conguration

HyperDuo oers the following two modes that you can congure using either of the

procedures outlined in the following sections:

• Safe mode creates a virtual disk that is optimized for best fault tolerance – the

frequently accessed les copied to the SSD for performance are also stored on the

HDD. It is safe to use with hard drives that contain existing data. Virtual disks created

in safe mode can also be partially rebuilt if the SSD fails, but not if the HDD fails.

• Capacity mode creates a virtual disk that is optimized for maximum utilization of

the SSD – the frequently accessed les are moved to the SSD (not copied). Virtual

disks created in capacity mode have better read and write performance than those

created in safe mode. However, they cannot be rebuilt.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

StarTech.com PEXMSATA343 Manual de instrucciones Pagina 13