StarTech.com 35S24M2NGFF Manual de instrucciones descargar pdf (Pagina 5)

Instruction Manual

Introduction

Packaging Contents

• 1x 4x M.2 SSD to 3.5in SATA HDD Adapter (35S24M2NGFF)

• 4x SATA data cables

• 1x SATA power extension cable

• 4x M.2 SSD Installation screws

• 4x Bracket Mounting Screws.

System Requirements

• 4x M.2 NGFF SATA SSD Drive

• 1x Computer System with:

• 1x Available 3.5in expansion bay

• 4x Available SATA ports

• 1x Available SATA Power connector on the power supply

• 1x Philips Head Size 1 Screw Driver

• 1x Philips Head Size 2 Screw Driver

M.2 NGFF SSD Installation

WARNING! SSD Drives and storage adapters require careful handling. If you are

not careful with your SSD Drive, lost data may result. Always handle your drive with

caution. Be sure that you are properly grounded by wearing an anti-static strap when

handling computer components or discharge yourself of any static electricity build-up

by touching a large grounded metal surface (such as the computer case) for several

seconds.

1. Assess the lengths of your drives to determine if the SSD installation standos

require relocating. The board is labeled with the respective drive types for length,

but if your drive length is unknown, place your SSDs next to each of the M.2 (NGFF)

SSD connectors, note which drive installation holes match the height of your SSDs.

If the standos are already installed in the correct position please proceed to step 6.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

StarTech.com 35S24M2NGFF Manual de instrucciones Pagina 5