StarTech.com SM2NGFFMBU33 Manual de instrucciones

Manual Revision: 12/16/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual75. Using a Philips head screw driver (not included), replace the 2 drive tray screws on either side of the USB 3.0 Micro B port, o

Instruction Manual8How to UseConnecting the Hard DriveOnce the enclosure has been attached to a computer, and the OS has installed the necessary softw

Instruction Manual9Initializing the Hard Drive1. If the SATA Hard Drive is blank it may need to be initialized and formatted before use. From the mai

Instruction Manual10Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsProduct Diagram ...1Enclosure ...

Instruction Manual1Product DiagramEnclosureInternal Drive Tray1. Drive tray screws2. USB 3.0 Micro-B port1. M.2 (NGFF) SSD Connector2. Drive insta

Instruction Manual2IntroductionPackaging Contents• 1 x USB 3.0 SATA HDD/SSD Enclosure• 1 x USB 3.0 Cable• 1 x SSD Mounting Screw and Stando• 1 x

Instruction Manual3Hardware InstallationWARNING! SSD Drives and storage adapters require careful handling. If you are not careful with your SSD Drive,

Instruction Manual43. Install your M.2 SSD into the drive tray, by following the below steps. a. Determine if the drive installation bracket requires

Instruction Manual5c. (Only required if the drive installation bracket requires relocating) Reseat the drive installation stando in the drive install

Instruction Manual6e. Slide the M.2 connector on the SSD into the M.2 reciprocal connector on the drive tray. f. Press the drive down toward the drive