StarTech.com C3000 Manual de usuario descargar pdf (Pagina 36)

CAUTION

To prevent improper cooling or thermal damage, do not operate

the server blade or the enclosure unless all device bays are

populated with either a component or a blank.

Figure A-5. The c3000 enclosure is divided by sheet metal panels into two full-height zones. Zone 1 and Zone 2

are divided in half by a removable shelf to accommodate a maximum of eight half-height device bays per

enclosure. These zones reflect the PCIe bus mapping in the signal midplane and limit placement of the server

blade/storage blade combination. The signal midplane has a direct PCIe link connecting adjacent paired device

bays.

IMPORTANT

The server blade/storage blade relationship cannot extend beyond

the removable dividers between full height device bays, nor can it

span the removable bay shelf dividing the zone into half-height

device bays

The enclosure comes preinstalled with removable full-height dividers between the four device bays in

Zone 2 and the four device bays in Zone 1. In addition, a half-height divider is available for use

between device bays 4 and 8 if the full-height divider is removed. Using these combinations of

dividers, the following combinations of server blades can be installed:

• Eight half-height server blades with both full-height dividers installed

• Four full-height server blades with both full-height dividers removed

• Four half-height server blades in Zone 1 with one full-height divider installed

• Two full-height server blades in Zone 1 with one full-height divider removed

• Four half-height server blades in Zone 2 with one full-height divider installed

• Two full-height server blades in Zone 2 with one full-height divider removed

• One full-height server blade and two half-height server blades in Zone 2 with one full-height divider

removed and the half-height divider installed

1 2 ... 31 32 33 34 35 36 37 38

Sin comentarios

StarTech.com C3000 Manual de usuario Pagina 36