StarTech.com RACKCONS2001 Manual de instrucciones descargar pdf (Pagina 9)

and OSD functions. For more information on conﬁguring the display

settings, please refer to the manual that accompanied your video card.

Testing the Console

To test that the console is working properly, perform the following steps:

1. Power up the rack console, and then turn on your computer.

2. Make sure the video image is centered within the screen area. Use

the OSD controls to adjust the image (see Panel controls and OSD

functions) or press the Auto button on the right hand side of the

monitor.

Note: If the unit does not power up when the panel is pulled up, try

pushing the soft power on/off button on the right side of the monitor

panel to power up the unit.

Note:You can adjust the horizontal and vertical position, contrast, and

brightness to better suit your video card and your personal preference.

Before you begin, make sure that power to all of the devices you will

be connecting to the console have been turned off. To prevent damage

to your installation due to ground potential difference, make sure that

all of the devices being installed are properly grounded. Once all

peripherals have been connected, please power them on.

Panel Controls and OSD Functions

The following controls are located on the bottom side of the the console

monitor:

Controls Descriptions

Soft power on/off. Adjacent LED is lit when on.

Auto

Auto-synchronize and scale down display to any valid factory preset

timings.

Press to scroll to the function you want to adjust.

Down

Press to scroll to the function you want to adjust.

To access the main menu. This button also acts as the Enter button.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

StarTech.com RACKCONS2001 Manual de instrucciones Pagina 9