StarTech.com PEX10000SFP Manual de instrucciones descargar pdf (Pagina 11)

Instruction Manual

Connecting to a Network

1. With the power to your computer disconnected, and the computer o, if not already

completed, insert the 10G SFP+ transceiver module of your choice, compatible to

your network, into the SFP+ slot on the card.

2. Prepare a ber network cable with corresponding connectors for the two end

devices. One end will connect to the 10G ber card, while the other end will connect to

a 10G ber port on your network switch/device.

3. Connect the ber network cable to the proper connector on your SFP+ transceiver

module on the 10G ber card.

4. Connect the other end of the ber network cable to your 10GBase-LR/SR/LRM

switch.

5. When the ber network cable is properly connected, reconnect the power and turn

your computer on.

6. Check the LED on the 10G ber card to ensure a connection is established.

Link: Solid, green

Activity: Flashing, green

1 2 ... 6 7 8 9 10 11 12 13 14 15

Sin comentarios

StarTech.com PEX10000SFP Manual de instrucciones Pagina 11