Manual Revision: 12/03/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7Verifying InstallationWindows1. From the main desktop or start menu, right-click on “Computer” then select “Manage.” 2. In the Co

Instruction Manual8Connecting to a Network1. With the power to your computer disconnected, and the computer o, if not already completed, insert t

Instruction Manual9SpecicationsPorts 1Interface Fiber EthernetBus Type PCI ExpressCard Type Standard Prole (LP bracket incl.)Industry StandardsIEE 8

Instruction Manual10NoteFiber data transfer speeds and distances are dependent on the SFP+ transceiver module used (sold separately)Dimensions (LxWxH)

Instruction Manual11Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsIntroduction ... 1Packagi

Instruction Manual1IntroductionPackaging Contents• 1x 1 Port PCI Express 10GBase-LR/SR/LRM Fiber Network Card• 1x Low-Prole Bracket• 1x Driver CD

Instruction Manual2Product DiagramInstallation Hardware InstallationWARNING!PCI Express cards, like all computer equipment, can be severely damaged by

Instruction Manual3Note: This card will work in PCI Express slots of additional lanes (i.e. x8, or x16 slots).4. Gently insert the card into the open

Instruction Manual44. Expand the Other Devices section, and right-click on the newly detected “Ethernet Controller” device and select Update Drive

Instruction Manual56. From the next screen labeled Select your device’s type from the list below, select Show All Devices (should be highlighted

Instruction Manual611. Click the OK button on the Install From Disk dialog box which will close the window.12. Once back at the Select the Device Dr