StarTech.com USBDUP15 Manual de instrucciones descargar pdf (Pagina 10)

Instruction Manual

2. Once the copy has completed, the green LED will stop blinking. The destination

Flash drive can be removed and a new Flash drive inserted, then the copy will

automatically start again. The LCD display will show the accumulated quantity of the

successful/failed duplications and the drive that is still copying.

NOTE:

a) When the copy is in progress, the green LED will ash for each Flash drive that is

connected. When the copy has nished, the green LED will stop ashing and remain

illuminated. If an error occurs, the red LED will illuminate.

b) Do NOT remove the Flash drive while the system is copying (green LED is ashing).

c) Once the copy process has completed (green LED is solid), you can then take out

that Flash drive and insert a new one.

d) During an Asynchronous copy, you can press the up and down arrows to check each

Flash drive’s copy status and progress. This works both during a copy (green LED

ashing) and when there is an error (red LED solid).

2. Compare

Check the Flash drive after a copy has completed to ensure the copy has completed

successfully.

3. Copy + Compare

Automatically compares the Flash drive once the copy has completed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

StarTech.com USBDUP15 Manual de instrucciones Pagina 10