Manual Revision: 03/29/2011DE: Bedienungsanleitung - de.startech.comFR: Guide de l'utilisateur - fr.startech.comES: Guía del usuario - es.startec
Instruction Manual7Advanced Menu OptionsThe Advanced Menu can be access from the main menu by pressing and holding the <ESC> button for several
Instruction Manual8Duplicator (Copy) ModeUse the <UP> and <DOWN> arrows on the duplicator dock to select the Copy HDD mode and press the E
Instruction Manual9Available RAID ModesMode FunctionNormal Two independent disksRAID0Striped drives for maximum data transfer rates. Com-bined capaci
Instruction Manual10SpecicationsBus Interface USB 2.0Chipset ID ACARD ARC286Connectors2 x 7+15 SATA connector2 x 40-pin IDE male2 x LP4 molex male1 x
Instruction Manual11Technical SupportStarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solu
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.
FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FC
Instruction ManualiTable of ContentsIntroduction ...
Instruction Manual1Introduction The StarTech.com UNIDUPDOCK functions as both a convenient hard drive copying/imaging solution and an external USB to
Instruction Manual2Power connectorON/OFF switchUSB connector7+15 SATA connector40-pin IDE connectorLP4 molex connectorBuilt-in LCD screenConguration
Instruction Manual3InstallationWARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard
Instruction Manual47. Follow the same procedure for either a SATA or IDE hard drive for the Destination side of the duplicator dock. NOTE: SATA and I
Instruction Manual5Driver InstallationNo driver installation is required for any supported operating system, as this hard drive dock is natively suppo
Instruction Manual6Compare HDD• Compares the sectors on the Source disk to the Destination disk. Used to ensure that the Copy operation was successf
Comentarios a estos manuales