StarTech.com SV231DPUA Manual de instrucciones

Manual Revision: 05/01/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7To select a computer:Left <CTRL> + Left <CTRL> + <1>(Example: Selects the computer at port 1.)Left <CTRL> +

Instruction Manual8Scan TimeFour options are available for users to set the Scan Time duration, it includes 3, 8, 15 and 30 seconds.Note: Scan Time is

Instruction Manual9USB 1: press the hotkey below to turn ON/OFF the USB-Port Rule onboth USB Hub ports (2-port only) or USB Hub port 1 (4-port only):L

Instruction Manual102. For those keyboards that do not have or support <ScrollLock>, please press and HOLD the Left <SHIFT> and press <

Instruction Manual11SpecicationsSV231DPUA SV431DPUANumber of Ports 2 4Computer Connectors (per port)1 x DisplayPort1 x USB type B2 x 3.5mm mini-jackC

Instruction Manual12SV231DPUA SV431DPUAOperatingTemperature0°C ~ 40°C (32°F ~ 104°F)Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)Humidity 0 ~ 80% RH

Instruction Manual13Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Instruction ManualiTable of ContentsIntroduction ...1Features

Instruction Manual1Introduction Features• Easy installation, no drivers required • Supports Plug and Play and hot swap to save time from rebooting t

Instruction Manual2Hardware InstallationFront View - SV231DPUARear View - SV231DPUAPort Selection/Link LEDPort Selection Button

Instruction Manual3Front View - SV431DPUARear View - SV431DPUAPower LEDPort Selection ButtonPort Selection/Link LED

Instruction Manual4*installation pictures are representations only1. Plug a monitor into the Console’s DisplayPort connector; plug a USB keyboard and

Instruction Manual5used in place of separate individual cables, StarTech.com ID: DP4N1USB6.4. Repeat for Steps 2 and 3 for each PC port on the KVM sw

Instruction Manual6Port Selection Button2-Port: Pressing the front panel “Select” button will toggle between the two ports on the KVM switch.4