StarTech.com PEXUSB3S2 Manual de instrucciones descargar pdf (Pagina 5)

Hardware Installation

Turn your computer off and any peripherals connected to the 1.

computer (ie. printers, external hard drives, etc.). Unplug the power

cable from the rear of the power supply on the back of the computer.

Remove the cover from the computer case. See documentation for 2.

your computer system for details.

Locate an open PCI Express slot and remove the metal cover plate 3.

on the rear of the computer case. Note that this card will work in PCI

Express slots of additional lanes (ie. x4, x8 or x16 slots)

Insert the card into the open PCI Express slot and fasten the bracket 4.

to the rear of the case, per your computer’s documentation.

Connect an LP4 molex power connector from the computer’s power 5.

supply to the LP4 connector on the card.

Place the cover back onto the computer.6.

Insert the power cable into the socket on the power supply.7.

USB 3.0

type A ports

LP4 molex

connector

1 2 3 4 5 6 7 8 9

Sin comentarios

StarTech.com PEXUSB3S2 Manual de instrucciones Pagina 5