StarTech.com PEX4S552 Manual de instrucciones descargar pdf (Pagina 5)

Instruction Manual

Installation

Please note: Prior to hardware installation, please ensure that the neces-

sary software has been installed on the host computer as detailed below.

Software (Drivers)

Windows® 2000/XP/Server 2003

From the Windows® desktop click 1. Start, then Run.

In the command line that appears, type:

x:\PCIe\MCS9901\XP\PCIeSetup32.exe,

(where x represents the location of the CD/DVD-ROM drive).

Click on

3. OK.

Click on

4. Install to begin installing the drivers.

Click the

5. Exit button to complete the driver installation, then shut down

the PC.

Install the PCIe card in an available PCI Express slot on the host 6.

computer. For further reference, please see the section titled

Hardware Installation.

Once the PEX4S552 card has been installed within the system, power

up the computer. Once the operating system boots, Windows® will

automatically start installing the device driver software.

Windows® XP(x64), Server 2003(x64)

From the Windows® desktop click 1. Start, then Run.

In the command line that appears, type:

x:\PCIe\MCS9901\XP64\PCIeSetup64.exe

(where x represents the location of the CD/DVD-ROM drive).

Click on

OK.

Click on

Install to begin installing the drivers.

Click the

Exit button to complete the driver installation, then shut down

1 2 3 4 5 6 7 8 9 10

Sin comentarios

StarTech.com PEX4S552 Manual de instrucciones Pagina 5