StarTech.com 25SAT22MSAT Manual de instrucciones descargar pdf (Pagina 9)

Instruction Manual

Use the included jumpers and the table below, to short the pins and set your desired

RAID mode.

RAID Mode Description Short Pins

RAID 0 Striping - Improves system performance 1-2, 4-5

RAID 1

Mirror – Creates a redundant drive on the

second drive for security

2-3, 4-5

BIG

Spanning – Creates a large single drive

volume consisting of both drives.

1-2, 5-6

JBOD

Just a Bunch of Disks – Allows access to both

drives individually

(Note: A port multiplier compatible SATA

controller is required for this mode)

2-3, 5-6

Set RAID Conguration

Note: Your RAID conguration must be set to JBOD before the device can be

recongured to RAID 0, RAID 1, or BIG. If you have set a dierent RAID conguration

and now wish to recongure your RAID, please set the device back to JBOD before

changing the conguration again.

1. Set the RAID Lock/Unlock Jumper Pins to the unlock position.

RAID Mode Setting Jumper Pins

The RAID setting jumper pins, located next to the SATA connector enable you to set

your desired RAID conguration between RAID 0, RAID 1, JBOD, and RAID initial Mode.

4 5 6

1 2 3

RAID Setting

Jumper Pins

SATA Connector

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

StarTech.com 25SAT22MSAT Manual de instrucciones Pagina 9